Computer Awareness - SPLessons
boy2

IBPS RRB Clerk Computer Awareness Quiz 19

Home > > Tutorial
SPLessons 5 Steps, 3 Clicks
5 Steps - 3 Clicks

IBPS RRB Clerk Computer Awareness Quiz 19

shape Introduction

What is Computer Awareness? Computer Awareness, also known as Computer Aptitude is one of the prominent sections in various recruitment related competitive exams in India. IBPS RRB Clerk Computer Awareness Quiz 19 lists some of the important questions for the preparation of Computer Awareness module. The most significant topics to be learnt for Computer Awareness module are as follows:
  1. History of Computers
  2. Computer Fundamentals
  3. Parts of a Computer System
  4. Data Processing Cycle of a Computer
  5. Computer Languages
  6. Input Devices & Output Devices
  7. Operating Systems
  8. Database Management Systems
  9. Microsoft Office
  10. Keyboard Shortcuts
  11. File Extensions
  12. Networking and Internet
  13. Computer Viruses
  14. Important Abbreviations

shape Quiz

1. The mouse pointer moves erratically, what is the possible cause? The mouse
    A. ball is dirty B. is not connected C. driver is not installed properly D. has an incorrect IRQ setting

Answer: Option A
2. Voltage is measured:
    A. in parallel B. in series C. after breaking the circuit D. after checking resistance

Answer: Option A
3. Your customer tells you the print quality of their dot matrix printer is light then dark. Which of the following could cause the problem.
    A. Paper slippage B. Improper ribbon advancement C. Paper thickness D. Head position

Answer: Option B
4. The 34-pin connection on an I/O card is for?
    A. Floppy drive B. SCSI drive C. IDE drive D. Zip drive

Answer: Option A
5. The terms "red book", "yellow book", and "orange book" refer to:
    A. SCSI B. ide C. floppy drive technology D. CD-ROM standards

Answer: Option D
1. On the 16-bit ISA bus, IRQ2 is elevated to which higher level Interrupt?
    A. 9 B. 11 C. 13 D. 15

Answer: Option A
2. What beep codes could indicate a system board or power supply failure?
    A. steady short beep B. no beep C. one long continuous beep tone & steady long beeps D. All of the above

Answer: Option D
3. To view any currently running Terminate Stay Resident (TSR's) programs you could type:
    A. Memory B. MEM C. SYS /M D. Memmaker

Answer: Option B
4. Which part of the laser printer should NOT be exposed to sunlight?
    A. Transfer corona assembly B. PC drum C. Primary corona wire D. Toner cartridge

Answer: Option B
5. After doing a low-level format, what would be the next step in configuring the hard drive in a system?
    A. Format DOS partition B. Install operating system C. Configure DMA channel and back-up interrupt D. Partition had disk

Answer: Option A
1. Resistance is measured in ?
    A. Volts B. Amps C. Watts D. Ohms

Answer: Option D
2. What command is used to reset a MODEM when using the "AT Command Set"?
    A. ATR B. ATZ C. DTR D. DCE

Answer: Option B
3. When installing a SCSI CD-ROM drive, you must set the CD-ROM SCSI adapter to
    A. B0007 B. An unused SCSI address C. The same address as the SCSI device before the CD-ROM D. SCSI ID = 1

Answer: Option B
4. Pick the correct choice for the 80386SXCPU.
    A. 16 bit word size, 16 bit data path B. 32 bit word size, 16 bit data path C. 8 bit word size, 32 bit data path D. 32 bit word size, 8 bit data path

Answer: Option B
5. In Inkjet technology the droplets of ink are deflected by?
    A. multi directional nozzles B. electronically charged plates C. high pressure plates D. electro static absorbtion

Answer: Option A

Computer Awareness - Related Information
IBPS RRB Clerk Computer Awareness Quiz 1
IBPS RRB Clerk Computer Awareness Quiz 2
IBPS RRB Clerk Computer Awareness Quiz 3
Computer Awareness Book for Bank Exams
Hide Index Show Index