RBI JE - SPLessons

RBI JE Electrical Paper

Home > > Tutorial
SPLessons 5 Steps, 3 Clicks
5 Steps - 3 Clicks

RBI JE Electrical Paper

shape Introduction

RBI JE Online Examination, will comprise of Objective Tests for 300 marks consisting of 4 Sections as follows. A composite time of 150 minutes will be given for answering the questions. The below sections gives the detailed information about RBI JE Electrical Paper (Engineering Discipline-I) Section.

shape Pattern

Sr.No. Name of Tests (Objective) No. of Questions Maximum Marks (Total Weighted Score) Total Time
1 English Language 50 50 150 mins (separate time for each section)
2 Engineering Discipline Paper I 40 100
3 Engineering Discipline Paper II 40 100
4 General Awareness 50 50
Total 180 300
Below mentioned are the different categories of expected questions in the section of RBI JE Electrical Paper (Engineering Discipline-I).

shape Syllabus

[Click Here] for RBI JE Online Examination Syllabus

shape Samples

1. Resistance is measured in
    A. henries B. ohms C. hertz D. watts

Answer: Option (B)
2. An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately
    A. 385 B. 38.5 C. 3.1 D. 31

Answer: Option (D)
3. A 240 H inductor is equivalent to a
    A. 0.240 mH inductor B. 0.000240 mH inductor C. 240 mH inductor D. 240 H inductor

Answer: Option (A)
4. The two basic components of a Thevenin equivalent ac circuit are
    A. the equivalent voltage source and the equivalent series resistance B. the equivalent voltage source and the equivalent series impedance C. the equivalent voltage source and the equivalent parallel impedance D. the equivalent voltage source and the equivalent parallel resistance

Answer: Option (B)
5. In a three-phase system, when the loads are perfectly balanced, the neutral current is
    A. zero B. one-third of maximum C. two-thirds of maximum D. at maximum

Answer: Option (A)
6. A 33 half-watt resistor and a 330 half-watt resistor are connected across a 12 V source. Which one(s) will overheat?
    A. 33 B. 330 C. both resistors D. neither resistor

Answer: Option (D)
7. When the speed at which a conductor is moved through a magnetic field is increased, the induced voltage
    A. increases B. decreases C. remains constant D. reaches zero

Answer: Option (A)
8. What kVA rating is required for a transformer that must handle a maximum load current of 8 A with a secondary voltage of 2 kV?
    A. 4 kVA B. 0.25 kVA C. 16 kVA D. 8 kVA

Answer: Option (C)
9. Materials with lots of free electrons are called
    A. conductors B. insulators C. semiconductors D. filters

Answer: Option (A)
10. A certain current source has the values IS = 4 µA and RS = 1.2 M. The values for an equivalent voltage source are
    A. 4.8 V, 1.2 M B. 1 V, 1.2 M C. 4.8 V, 4.8 M D. 4.8 V, 1.2 M

Answer: Option (D)

RBI JE – Related Information
RBI JE – English Language - Study Guide
RBI JE – General Awareness - Study Guide